Lenze Engineer v2.27 Full VERSION

Lenze Engineer v2.27 Full VERSION

The Lenze Engineer: Engineering software ‘Engineer’ could be used for project planning and configuration up to operation of L-force automation and drive products from Lenze.

  • Lenze Engineer Version history: Information on function extensions of Engineer.
  • Different installations can be executed:
    • Engineer V2.24.1
      • Full version of Engineer V2.24.1 SP1.
      • Update of Engineer from V2.24.0 to V2.24.1 SP1 (installation of Engineer V2.24.0 required)
      • A licence is required for being able to use the full range of functions, but it can be tested 30-days free of charge.
    • Lenze Packages (offline installation in case of no internet connection )
  • Offline installation of Lenze packages (only in case of no internet connection)

System Requirements for Lenze Engineer

  • Microsoft® Windows® XP Professional (32 Bit) as of SP3 / Windows® Server 2003 / Windows® Server 2008 / Windows® 7 (32 und 64 Bit) / Windows® 8.x / Windows® 10 (without support of safety parameterization)
  • IBM-compatible PC with Intel® processor as of 1.4 GHz, 1GB RAM, 2GB HDD or equivalent
  • Minimum resolution of 1024 x 768 pixels (@ Windows 7/8: text size 100% / 96 DPI = “smaller” or 150% = “greater”)

Lenze Engineer Software Installation:

Depending on the current status of your PC there are two different ways to execute the installation:

  1. Previous version V2.24.0 is installed: Installation of Service Pack 1
    1. Close all Lenze software.
    2. Save the following file on your PC:
      • L-force Engineer_V227.zip
    3. In case of no internet connection during the installation process, no software updates could be carried out via Lenze package manager automatically.

For Updated Installation Packages check Lenze official Website

  1. In all other cases
    1. Close all Lenze software.
    2. Save the following file on your PC:
      • L-force Engineer_V227.zip (341 MB)
    3. Unpack the ZIP file in any directory on your PC.
    4. In the extracted directory start the setup.exe file.
    5. Follow the installation instructions.
    6. Use the Following Key to Register the Engineer v2.27 Software

For Direct Download Lenze Engineer

L-force Engineer_V227 (341 MB)

  • L Force Engineer Serial Numbers
  • Lenze Engineer v2.XX
  • DB58-9726-A60A-C8B3
  • Lenze Engineer Old Versions:
  • 10892135
  • 36548284
  • 40426853
  • 43324531
  • 53565393
  • 58253872